Lever demo display.

Another angle of the demo display.

Bottom of the demo display.

Make your antique switches work again.

Installation from below and connected to the antique switches.

Mounted above the surface.

Mounted below the surface.

Bottom view of the surface mounted lever.

Mounted inside the facia.

Wire hook up to switch on the surface.

Frog or point power routing.

Coupling for crossovers.

Crossovers on the left, power on the right.

Lever in the forward position.

Lever in the back position.

Wire mounted in foam.

Slice foam with a sharp knife and place wire in the foam.

Another angle of the foam mounting.

Bottom side of bell crank.

Angle mounting with brackets.